|
Thumb Safety, STI - Single
Single-sided thumb safety for 1911 or 2011-style pistols.
More Info
|
Thumb Safety, Wilson - Ambi
The ambi thumb safety is made of stainless steel.
More Info
|
Thumbguard, BCG
This Kreb's style shield prevents thumb from dragging on the slide and causing malfunctions.
More Info
|
|
Thumbguard, BCG - Left Handed
This Kreb's style thumb shield is made for left-handed shooters or anyone who wants a thumb guard mounted on the right side of the frame.
More Info
|
Trigger Guard Screws, STI
Includes two screws for the trigger guard.
More Info
|
Trigger Guard Sleeve, STI
Includes one sleeve into which the trigger guard screws are inserted.
More Info
|
|
Tuned Trigger Group, BCG - Pro Series
The BCG Pro Series tuned trigger group includes the highest quality trigger parts hand fit and matched to each other to give you the best competition trigger.
More Info
|
Tungsten Guide Rod
This one-piece guide rod is made of heavier and more reliable tungsten steel.
More Info
|
0.060" Diameter Fiber Optic Rod
Brightest fiber optic on the market. A veritable beacon of light available in 12-inch lengths of red, green, and yellow fiber optic rod.
More Info
|
|
1911 Magazine, Wilson - 10-Round 45 ACP Only
The Limited 10 magazine for your 45 ACP 1911 pistol.
More Info
|
BCG Lightning Slide
A lightened slide (classic or unique) with the Brazos Custom holes. 40 S&W available online; call for 38 Super.
More Info
|
C-More Sight, Railway
The Railway mounts to all Weaver and Picatinny rail style scope mounts.
More Info
|
|
C-More Sight, Slide Ride
Direct mounting to either a scopemount or frame with Weaver rail.
More Info
|
Follower Kit, Grams
The revolutionary design of the Grams follower kit will cure your magazine woes.
More Info
|
Grip Bushing, STI - For Frame
Includes two grip bushings for the frame.
More Info
|
|
Grip Screw Kit, STI
All the screws and components you’ll need to repair or replace your STI or SV grip.
More Info
|
Grip Screws, STI
Includes two each of both the upper and lower grip screws.
More Info
|
Lightning Rod Standard (STI/SV)
Replacement sight for a STI/SV factory dovetail cut (0.300x0.060x60 degrees) with a 0.125" wide blade that uses 0.060" diameter fiber optic rod.
More Info
|
|
STI 1911 Government Length Magazine
STI magazine for use in 1911-style pistols.
More Info
|
STI LS/Rogue Magazine
STI magazine for the LS and Rogue pistols.
More Info
|
Super-Tuned 4-Pack with Grams or Dawson Basepad
Four Brazos Custom Super-Tuned magazines (140 mm) where you select either a Grams or Dawson basepad.
More Info
|
|
Super-Tuned Carry/IPSC Standard Magazine
Super-Tuned carry magazine that fits the IPSC standard box.
More Info
|
Super-Tuned Magazine with Grams or Dawson Basepad
The Brazos Super-Tuned magazine uses all premium parts where you select either a Grams or Dawson basepad. The magazine is tuned for reliability and max capacity.
More Info
|
0.040" Diameter Fiber Optic Rod
Brightest fiber optic on the market. A veritable beacon of light available in 12-inch lengths of red, green, and yellow fiber optic rod.
More Info
|
|
C-More Sight, Serendipity for 1911 Frames
Serrendipity (SL750/CSL750) attaches without the use of a scopemount to 1911 frames.
More Info
|
C-More Sight, Serendipity for 2011 style frames
Serendipity (SL830/CSL830) attaches without the use of a scopemount to wide-body STI/SV frames.
More Info
|
Magazine Spring, Grams
Grams Engineering magazine spring with 13.5 coils is used as a replacement spring for the Grams follower kits.
More Info
|
|
Follower, STI - Standard
A low-cost follower for 2011-style magazines.
More Info
|
Lightning Rod MiniDot (Kimber/Novak)
Replacement sight for a standard Kimber/Novak dovetail cut (0.330x0.075x65 degrees) with a 0.100" wide blade that uses 0.040" diameter fiber optic rod.
More Info
|
STI 2011 Magazine
Complete STI magazine for use in STI/SV double stack guns.
More Info
|
|
STI Double Stack Magazine Tube
Replacement mag body/tube for STI/SV double-stack magazine.
More Info
|
Lightning Rod MicroDot (Kimber/Novak)
Replacement sight for a Kimber/Novak dovetail cut (0.330x0.075x65 degrees) with a 0.100" wide blade that uses a recessed 0.040" diameter fiber optic rod.
More Info
|
Lightning Rod MiniDot (STI/SV)
Fiber optic replacement sight for an STI/SV factory dovetail cut (0.300x0.060x60 degrees) with a 0.100" wide blade that uses 0.040" diameter fiber optic rod.
More Info
|
|
Follower, STI - 9mm with Spacer
This 9mm follower comes with a spacer that fits only in 126 mm and 140 mm magazine tubes.
More Info
|
Hammer Spring, BCG
The hammer spring (aka mainspring) is available in several weights
More Info
|
Lightning Rod MicroDot (STI/SV)
Replacement sight for an STI/SV factory dovetail cut (0.300x0.060x60 degrees) with a 0.100" wide blade that uses a recessed 0.040" diameter fiber optic rod.
More Info
|
|
Mag Catch Spring, BCG
The mag catch spring is available in factory, reduced power (#1 and #2), and extra power weights.
More Info
|
BoMar BMCS Combat Rear Sight
Combat-style adjustable rear sight.
More Info
|
C-More Sight Railway Plate
Used to mount a C-More Slide Ride scope to a Weaver rail.
More Info
|
|
C-More Sight Dot Module
Replacement dot module for the C-More site.
More Info
|
BoMar BMCS-K Rear Sight
BMCS-K is designed to replace Kimber's factory adjustable rear sight. No milling is required.
More Info
|
C-More Sight Battery - 3-Pack
Duracell -- The battery of choice for C-More.
More Info
|
|
BoMar BMCS-LP Rear Sight
BMCS-LP is designed to replace the Para Ordnance factory adjustable rear sight. No milling is required.
More Info
|
C-More Blast Blocker
C-More blast shield protects your C-More lens from damaging debris.
More Info
|
Frame Buffers (set of 6)
These 0.095” thick frame buffers prevent expensive frame damage and soften the felt recoil when shooting high-pressure, major power factor loads.
More Info
|